Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

High energy storage properties of lead-free Mn-doped (1-x)AgNbO3-xBi0.5Na0.5TiO3 antiferroelectric ceramics

In this work, 0.2 wt.% Mn-doped (1-x)AgNbO₃-xBi_0.5Na_0.5TiO₃ (x = 0.00–0.04) ceramics were synthesized via solid state reaction method in flowing oxygen. The evolution of microstructure, phase transition and energy storage properties were investigated to evaluate the potential as high energy storage capacitors. Relaxor ferroelectric Bi_0.5Na_0.5TiO₃ was introduced to stabilize the antiferroelectric state through modulating the M₁-M₂ phase transition. Enhanced energy storage performance was achieved for the 3 mol% Bi_0.5Na_0.5TiO₃ doped AgNbO₃ ceramic with high recoverable energy density of 3.4 J/cm³ and energy efficiency of 62% under an applied field of 220 kV/cm. The improved energy storage performance can be attributed to the stabilized antiferroelectricity and decreased electrical hysteresis ΔE. In addition, the ceramics also displayed excellent thermal stability with low energy density variation (<6%) over a wide temperature range of 20−80 °C. These results indicate that Mn-doped (1-x)AgNbO₃-xBi_0.5Na_0.5TiO₃ ceramics are highly efficient lead-free antiferroelectric materials for potential application in high energy storage capacitors.     

甲烷在钯基催化剂上脱氢的分子模拟

为探明甲烷在钯基二聚体催化剂上脱氢反应过程的微观机理,对甲烷燃烧催化剂的设计与使用提供指导。在M06L/6-311++G(d,p)+SDD//M06L/6-311G(d,p)+LANL2DZ基组水平上,采用密度泛函理论(DFT)对甲烷在钯基二聚体催化剂(Pd_2、PdPt和PdNi)上的脱氢过程进行了研究。对比了甲烷在催化剂Pd_2、PdPt和PdNi上反应的能垒(E_b)、活化能(E_a)及反应速率常数(k),结果表明:CH_2→CH是甲烷在二聚体Pd_2反应的速率控制步骤(RDS),而CH_3→CH_2是催化剂PdPt和PdNi反应的RDS;钯基二聚体催化剂对甲烷脱氢的催化活性顺序为PdPtPd_2PdNi;抗积炭性能顺序为PdNiPd_2PdPt。PdPt适用于要求催化效率较高的项目,而抗积炭性能较好的PdNi催化剂可用于大型工业催化。     

综合物探手段在前道矿山勘查中的应用

介绍了高精度磁法测量和高密度电阻率法测量的原理,并将其应用在前道矿山勘查中。通过对数据解译圈定构造断裂两条,为矿区深部找矿提供了指导。为下一步勘探工作提供了依据。     

Clustering biomedical and gene expression datasets with kernel density and unique neighborhood set based vein detection

It is a crucial need for a clustering technique to produce high-quality clusters from biomedical and gene expression datasets without requiring any user inputs. Therefore, in this paper we present a clustering technique called KUVClust that produces high-quality clusters when applied on biomedical and gene expression datasets without requiring any user inputs. The KUVClust algorithm uses three concepts namely multivariate kernel density estimation, unique closest neighborhood set and vein-based clustering. Although these concepts are known in the literature, KUVClust combines the concepts in a novel manner to achieve high-quality clustering results. The performance of KUVClust is compared with established clustering techniques on real-world biomedical and gene expression datasets. The comparisons were evaluated in terms of three criteria (purity, entropy, and sum of squared error (SSE)). Experimental results demonstrated the superiority of the proposed technique over the existing techniques for clustering both the low dimensional biomedical and high dimensional gene expressions datasets used in the experiments.     

浅谈不同给液方式在铜电解车间的应用

不同给液方式对铜电解过程中有重要的影响,不同的循环方式会影响槽内温度分布、电解液成分及阳极泥沉降等,因此,根据铜电解生产不同情况的需要,分析对比了多种给液方式在贵冶电解车间的应用,总结了这几种给液方式的优缺点和适用条件。     

High recoverable energy storage density and large energy efficiency simultaneously achieved in BaTiO3–Bi(Zn1/2Zr1/2)O3 relaxor ferroelectrics

Relaxor ferroelectrics have attracted much attention as electric energy storage materials for intermittent energy storage because of their high saturated polarization, near-zero remnant polarizations, and considerable dielectric breakdown strength (BDS). Despite the numerous efforts, the dielectric energy storage performance of relaxor ferroelectric ceramics is incomplete or unsatisfactory. The enhancement of recoverable energy storage density W_rec usually accompanies with the sacrifice of discharge-to-charge energy efficiency η; therefore, it is an important issue to achieve high recoverable W_rec and large efficiency η simultaneously. In this work, the (1-x)BaTiO₃-xBi(Zn_1/2Zr_1/2)O₃ (abbreviated as BT-100xBZZ, 0 ≤ x ≤ 0.20) ferroelectric ceramics were prepared using the conventional solid-state reaction method. The phase structure, microstructural morphology, dielectric and ferroelectric properties, relaxation behaviors, and energy storage properties of BT-BZZ ceramics were investigated in detail. X-ray powder diffraction, dielectric spectra, and ferroelectric properties confirm the transformation of tetragonal phase for normal ferroelectrics (BT) to pseudo-cubic phase for relaxor ferroelectrics (BT-8BZZ). A high recoverable energy storage density W_rec of 2.47 J/cm³ and a large energy efficiency η of 94.4% are simultaneously achieved in the composition of BT-12BZZ, which presents typical weakly coupled relaxor ferroelectric characteristics, with an activation energy E_a of 0.21 eV and a freezing temperature T_f of 139.7 K. Such excellent energy storage performance suggests that relaxor ferroelectric BT-12BZZ ceramics are promising dielectric energy storage materials for high-power pulsed capacitors.     

Models for circular data from time series spectra

Circular data are those for which the natural support is the unit circle and its toroidal extensions. Numerous constructions have been proposed which can be used to generate models for such data. We propose a new, very general, one based on the normalization of the spectra of complex-valued stationary processes. As illustrations of the new construction's application, we study models for univariate circular data obtained from the spectra of autoregressive moving average models and relate them to existing models in the literature. We also propose and investigate multivariate circular models obtained from the high-order spectra of stationary stochastic processes generated using linear filtering with an autoregressive moving average response function. A new family of distributions for a Markov process on the circle is also introduced. Results for asymptotically optimal inference for dependent observations on the circle are presented which provide a new paradigm for inference with circular models. The application of one of the new families of spectra-generated models is illustrated in an analysis of wind direction data.     

A Student's t-based density peaks clustering with superpixel segmentation (tDPCSS) method for image color clustering

Image color clustering is a basic technique in image processing and computer vision, which is often applied in image segmentation, color transfer, contrast enhancement, object detection, skin color capture, and so forth. Various clustering algorithms have been employed for image color clustering in recent years. However, most of the algorithms require a large amount of memory or a predetermined number of clusters. In addition, some of the existing algorithms are sensitive to the parameter configurations. In order to tackle the above problems, we propose an image color clustering method named Student's t-based density peaks clustering with superpixel segmentation (tDPCSS), which can automatically obtain clustering results, without requiring a large amount of memory, and is not dependent on the parameters of the algorithm or the number of clusters. In tDPCSS, superpixels are obtained based on automatic and constrained simple non-iterative clustering, to automatically decrease the image data volume. A Student's t kernel function and a cluster center selection method are adopted to eliminate the dependence of the density peak clustering on parameters and the number of clusters, respectively. The experiments undertaken in this study confirmed that the proposed approach outperforms k-means, fuzzy c-means, mean-shift clustering, and density peak clustering with superpixel segmentation in the accuracy of the cluster centers and the validity of the clustering results.     

The influence of sodium caseinate on the physical properties of spray‐dried honey

The aim of this work was to spray dry honey (rape and buckwheat varieties) with Arabic gum (AG) as a carrier alone or in combination with sodium caseinate (1% and 2% w/w NaCas) as a drying aid. Powder recovery ranged from 66.2 ± 0.7% to 75.8 ± 4.9%, and the values were significantly higher for samples containing NaCas. Powders were characterised by good flowability, the addition of NaCas had positive impact on this factor. However, the hygroscopicity of protein‐containing powders was higher, especially at 2% w/w of NaCas. Powders hygroscopicity was related to particle size: AG powder of the smallest particle size was the most hygroscopic, while the particle size did not affected flowability, which was strongly related to the feed solution composition. Based on the obtained results, it was concluded that the addition of 1% w/w of NaCas as a drying aid during buckwheat and rape honey spray drying with Arabic gum as a carrier is favourable, while the further increase of protein content does not give additional benefits.